Medals

Kudos Coaster Ideas

Race Medal Case

Step 1

Pop off the top and remove all Tru-Fit inserts but leave the metal plate in the base.

Finisher Medal Display

Step 2

Review the Tru-Fit insert colors and pick the one that best complements your medal. Place your medal on top of that Tru-Fit insert and set aside.

Race Medal Tabletop Display

Step 3

Replace a few of the remaining Tru-Fit inserts back into the base, above the metal plate.

Marathon Medal Display

Step 4

Place the medal and insert combo you set aside on top of the other Tru-Fit inserts. Bring the top edge of the base up to eye level to make sure you can just barely see the top of your medal above the rim. If you can’t see it, or there is too much showing, try adding or removing another Tru-Fit layer.

Medal Display Case

Step 5

Align your medal on top so it’s perfectly centered and place the top onto the base until it fits snug. You should hear a snap when it’s properly sealed. Your medal should fit snug against the top to avoid rattling. If it doesn’t, re-open the coaster and add another Tru-Fit insert and then re-close. If you’re forcing it to close, and you don’t hear a snap, try removing a Tru-Fit insert and then re-closing.

BONUS!

Show Off Some of the Ribbon

Marathon Medal Display

Bonus

Step 1

Pop off the top and remove all Tru-Fit inserts AND the metal plate. Then, cut or carefully remove the stitching from the seam on the ribbon.

Race Medal Holder

Bonus

Step 2

Review the Tru-Fit insert colors and pick the one that best complements your medal. Place your medal on top of that Tru-Fit insert and set aside.

Finisher Medal Holder

Bonus

Step 3

Place the ribbon inside the base, folding end-over-end in a triangular fashion. The trick is to disburse the ribbon evenly inside the base. Leave about 2” of the ribbon out of the base.

Marathon Medal Holder

Bonus

Step 4

Place the metal plate on top of the folded ribbon, leaving 2” hanging out of the base. Place the selected Tru-Fit insert color on top of the metal plate. This insert order provides a more stable, flat background for your medal to sit on.

Race Medal Holder

Bonus

Step 5

With the medal face side down, slide the extra 2” of ribbon through the slot in your medal until the slot is about half way down the ribbon.

Finisher Medal Display

Bonus

Step 6

Fold the ribbon to create a loop and then flip the medal face side up. Some adjustments may be necessary to position the medal where you’d like.

Race Medal Display Idea

Bonus

Step 7

Place the top onto the base until it fits snug. You should hear a snap when it’s properly sealed. Your medal should fit snug against the top to avoid rattling. If it’s too loose, try adding a Tru-Fit insert below the folded ribbon. If it’s too tight, try cutting away some of the ribbon to create more space inside the base.

Celebrate you, enjoy your drinks on us and remember to smile year-round!

[social_warfare]